Control - Multiple CPU Systems

The following video explains basics of Multiple CPU Systems, the idea behind such setup, CPUs combinations, their configuration, memory structure and parametrization on the GX Works3 side.

• Related Articles

• iQ-R - FTP Server using SD card

  This article explains how to prepare the iQ-R PLC to use the FTP Server function with access to files on the SD card. 1. FTP Server configuration in Module Parameter First, go to the Module Parameter window to enable the FTP Server. You can also ...

• Start-up guide for Recorder modules (RD81RC96 and RD81RC96-CA)

  This article describes basic concepts and capabilities of recording solutions provided by Recording modules. Introduction System Recorder is a solution that integrates the recording, reproduction and analysis features performed in the breakdown ...

• INV - FR-E800 - Position control in Vector Mode

  The article provides information on how to prepare the FR-E800 frequency converter and FR-A8AP -E-kit encoder card for positional vector operation. For details, refer to the manual: FR-E800 Instruction Manual (Function), Chapter 7 FR-A8AP E-kit card ...

• GENESIS V11 - MQTT connection to iQ-F PLC (FX5-ENET)

  This article explains how to read data from an iQ-F series FX5-ENET module to GENESIS V11 using a dedicated decoder. A sample GX Works3 project used in this example is added as an attachment. Precautions The MQTT communication function is officially ...

• MELSEC iQ-R Series Motion Module (RD78G) - Speed and torque control mode from the PLC side

  MELSEC iQ-R Series Motion Module (RD78G) - Speed and torque control mode from the PLC side It is the article from the series Melsec iQ-R Series Motion Module (RD78G) Quick Start Guide.  In this part you will learn how to: - controlling the speed of ...