iQ-R - built-in database

This video shows how to configure and manage built-in database in iQ-R controller, how to access to using internal function blocks and also external software

• Related Articles

• Modbus TCP on Build-in Ethernet port in iQ-F and iQ-R - Predefined Protocol

  This document describes the configuration of Modbus TCP communication on a bulit-in Ethernet port with STLite (750-352).  Wersja w j. polskim dostępna w załączniku Configuration Ethernet connection In Gx Works 3, open the embedded Ethernet port ...

• iQ-R - Interrupt handling of inteligent function modules

  This video shows the approach to interrupt handling of iQ-R inteligent function modules

• iQ-F and iQ-R firmware update procedure

  In this video you can see how to update firmware in iq-F, iq-R and modules via SD card or dedicated function in GX Works3 software.

• INV - FR-E800 - How to inverter control by iQ-R over CC-Link IE Field Basic

  This article how to set up CC-Link IE Field Basic connection between iQ-R PLC and FR-E800 inverter. It also presents ready to use function blocks to realize basic control, read inverter monitors as well as read and write FR-800 parameters through the ...

• Iconics Suite - Melsoft connection with iQ-R [Iconics Suite connection]

  Detailed description how to configure connection between Iconics Suite SCADA and iQ-R PLC controller using Melsoft Connection Remember that your PC has to have the static IP address in the same subnet as PLC. iQ-R PLC default address is 192.168.3.39 ...