Simple CPU Communication - simple way to exchange data between PLC's

This video shows how to use and what devices can be connected using SImple CPU Communication function to ME PLC controllers.

• Related Articles

• GENESIS V11 - MQTT connection to iQ-F PLC (FX5-ENET)

  This article explains how to read data from an iQ-F series FX5-ENET module to GENESIS V11 using a dedicated decoder. A sample GX Works3 project used in this example is added as an attachment. Precautions The MQTT communication function is officially ...

• iQ-F Simple CPU Communication with Siemens S7-1200

  This video shows how to communicate Mitsubishi iQ-F controller with Siemens S7-1200 using Simple CPU Communication function. <br> TIA Portal Configuration for PUT/GET Communication To enable proper communication between an S7 PLC and our PLC ...

• iQ-R - FTP Server using SD card

  This article explains how to prepare the iQ-R PLC to use the FTP Server function with access to files on the SD card. 1. FTP Server configuration in Module Parameter First, go to the Module Parameter window to enable the FTP Server. You can also ...

• Exchanging Labels - Navigator, GX Works3, GT Designer3

  This document shows the sample way for preparing label exchange between Mitsubishi PLC and HMI Navigator setting Building workspace Create new workspace. Initialize it with network configuration.   After this step, you can choose what is included to ...

• Modbus TCP on Build-in Ethernet port in iQ-F and iQ-R - Predefined Protocol

  This document describes the configuration of Modbus TCP communication on a bulit-in Ethernet port with STLite (750-352).  Wersja w j. polskim dostępna w załączniku Configuration Ethernet connection In Gx Works 3, open the embedded Ethernet port ...