Simple Motion
Motion module FX5-SSC-G with MR-J5-G or MR-JET-G - System startup
This article describes how to startup motion system base on FX5-SSC-G module. Article base on MR-J5-G but in the same way MR-JET-G can be used. PLC configuration Creating new project Startup GX Works3 and create new project. Select the model of the ...
iQ Monozukuri PACKAGING FAQ
This article answered for frequently asked questions about iQ Monozukuri PACKAGING. Q1. For what kind of application this package is useful? A1. This application package can be used for controlling product packaging machines and cutting machines for ...
Simple Motion - Homing and position table
Introduction This article shows how to perform homing of the servo drive and basic instructions for moving to the selected position. The article was prepared on the basis of the ...
FX5 with Simple Motion : Basic settings and JOG
Introduction his article shows how to configure and use the Simple-Motion FX5-40SSC module. The article begins with the basic module configuration, then shows the process of adding an axis to a project and the basic FB function blocks to support the ...